MPG EZ120R ARGB is a new fan product with optimized assemble experience by reducing effort and complex of cable management for PC assembly. Connecting fan and fan by magnetic blocks, that is just simple like children building bricks. You can also set up the RGB lighting by syncing with motherboard or customize the color and effects in MSI Center. Show off your cool vibe a breeze.
Visual Perfection, Thermal Power
Experience unbroken visual consistency across your entire system. This harmonized aesthetic is backed by the powerful thermal performance you need.
MPG EZ120 ARGB
General Fan Blade
Push air out the back.
MPG EZ120R ARGB
Reverse Fan Blade
Push air out the front.
Magnetic Connector Blocks
The Connector Blocks replace the general fan and ARGB cables, making it cableless and more accessible to connect. There are two block connections, one for delivering fan power and speed control and the other for the ARGB signal and synchronization. The blocks do not only deliver power and signal but also strengthen the connection between the fans.
Fan power delivering / Speed control
ARGB signal / Synchronizing
Magnetic Design
The embedded magnet of the fan frame assists the fans to connect well.
Every block of MPG EZ120R ARGB also has an embedded magnet that connects well to the fan and delivers power and signals.
EZ Cable Routing
MPG EZ120 ARGB
GENERAL FAN
Cable-less
No matter the chassis supports 2 x120 mm or 3 x 120 mm system fans at the same side, there is only one cable connecting to the motherboard or fan hub*.
Daisy-chain Connection*
The daisy-chain cable connects fans on different sides of the chassis. It helps cable routing of the rear I/O fan in case there's no suitable fan header on the motherboard.
*Daisy-chain cable is only available in 3-fan and 4-fan/pack.
Balance Fan Blade Design
While liquid cooler requires high air pressure but airflow is more important to chassis heat dispassion, MPG EZ120R ARGB is suitable for building a clean PC. With the 9-blade design, its has maximum air pressure of 1.82 mmH2O and maximum airflow of 66.72 CFM, always cool your rig.
Fluid Dynamic Bearing with Extra Nut Fixing
The noise of traditional FDB structure is produced by vibration of the bearing. The vibration also affects the fan longevity.
The exclusive structural design optimizes the original fluid dynamic bearing (FDB) design that decreases noise level of bearing and enhances durability by extra nut fixing structure.
Copper Tube
Moreover, with the use of Copper Tube, it has excellent resistance to scaling, high mechanical strength and lifetime resistance.
Amplify Your Creation With Fan Hub*
The hub features 4 expansion ports and supports up to 18 MPG EZ120 ARGB and MPG EZ120R ARGB fans. It offers flexibility in both configuration and expansion, and maximizes airflow and lighting demands simultaneously.
*Fan hub is only available in 3-fan and 4-fan/pack.
Total Control In Your Hands
Everything ranging from MPG EZ120 ARB and MPG EZ120R ARGB, fan speed to the ARGB lighting control can be adjusted through the MSI Center.
-
Fan Quantity43
-
ColorBlackBlackWhite
-
Fan Hub(Including MCU)Included
-
Sync to MotherboardVia hub
-
Mystic Light SyncCustom setting (via hub) / Sync with MB
MPG EZ120R ARGB / WHITE
- Reverse Fan Blade
- Patented Magnetic Connector Block
- Magnetic Design optimizes installation experience
- Exclusive Fluid Dynamic Bearing with Extra Nut Fixing
- Copper Tube
- Optional features: Fan hub & Daisy-chain cable are included in 3-fan and 4-fan / pack