• Graphics card holder, supports up to 7.5KG weight
  • Transparent Acrylic with laser carving design
  • Easy to fit in with any size graphics card
  • Mystic Light and Sync: Build in addressable RGB LEDs and supports Mystic Light Sync, controlled in one click.
 

Note: Please make sure there are at least 3 empty PCI slots under the graphics card in the chassis.
If there aren’t enough PCI slots below, you cannot install it.

  • The screws on the fixed graphics card need to be removed from the PCI vertical block.
  • The screw position with the rivet protruding can't be used, e.g., CORSAIR 570X RGB
  • The chassis with a fan on the bottom of the chassis may not be supported, e.g., InWin 303
  • The chassis without 3 screws below the graphics card cannot be used.
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Build in Mystic Light addressable LED
  7. JRAINBOW cable
  8. Laser carving
  9. Transparent Acrylic
  10. Flexible 10 mounting hole to fit graphics card
altas
  1. Build in Mystic Light addressable LED
  2. JRAINBOW cable
  3. Laser carving
  4. Transparent Acrylic
  5. Flexible 10 mounting hole to fit graphics car

Mystic Light

Offers multiple colors and variety effects for you to set up the whole rig by your own way.

atlas

Fit any size graphics card

ATLAS MYSTIC ARGB offers flexible 10 mounting holes to support different sizes and fans graphics cards.

atlas argb
atlas argb

Features

  • Transparent Acrylic with laser carving design
  • 10 mounting hole to fit in with any size graphics card
  • Mystic Light and Sync: Build in addressable RGB LEDs and supports Mystic Light Sync, controlled in one click.

SPEC

  • Dimension: 260x54x5mm
  • Supports up to 7.5KG graphics card weight
  • Supports up to 320x140x61mm graphics card size
  • Addressable RGB LED
  • Supports 1x JRAINBOW connector

 

All images and descriptions are for illustrative purposes only. For detailed specifications, please consult the product specifications page.

˄
us