After install Microsoft .NET Framework 4.5, the system pops up an error message "S-bar is stopping working" when start up the system.
Answer
Please remove the old S-Bar and install the latest version of S-bar. The latest version of S-bar is available on MSI website (See below).
(1) Following notebooks support [S-Bar 2.1, Ver: 21.012.12039] for Windows 7 32/64bits
U270, CX41, CR41 0M, X460, X460DX, GT60-0NG Workstation, GT60-0NF Workstation, GT60 0NE, GT60 0ND, GT60 0NC, GE60 0ND, GE60 0NC, CR61 0M/CR60, CX61, GX60 Hitman Edition, GX60 1AC, CX70, CR70 0M, GE70 0ND, GE70 0NC, GT70-0NH Workstation, GT70-0NG Workstation, GT70 Dragon Edition, GT70 0NE, GT70 0ND, GT70 0NC
(2) Following notebook supports [S-Bar 2.1, Ver: 21.012.12039] for Windows 7 32bits.
U180
(3) Following notebooks support [S-Bar 2.0, Ver: 20.012.11099] for Windows 7 32/64bits.
X370, CR460, CR430, FR420/FX420, GR620, GE620DX, GE620, CR650/GX670/CR670, FR720, FX720, GT783(GT783R), GT780DX(GT780DXR), GT780, GX780
Reference
Models
- GT60 0ND
- GT783(GT783R)
- GX60 3BE
- GX60 Hitman Edition
- CR650/GX670/CR670
- GT70 0NC
- X460
- GR620
- GT60 0NE
- CR41 0M
- GT70 0ND
- GT70 0NE
- FX620DX/FR620/FX620
- X460DX
- GT70 Dragon Edition
- FR420/FX420
- CR61 0M/CR60
- CX61
- GE60 0ND
- U180
- FR720
- GX780
- GE60 0NC
- GX60 1AC
- CX70
- X370
- CR430
- GE620
- GT780DX(GT780DXR)
- GE70 0ND
- FX720
- GE620DX
- CR70 0M
- CX41
- GT780
- U270
- GE70 0NC
- CR460
- GT60 0NC