Please follow the instructions below:

Before you start the process make sure you have:

A blank USB flash drive with at least 8GB of space

A computer with a stable internet connection

Create a windows installation USB flash drive

Insert the flash drive into a USB port on your computer

Go Microsoft website to download Windows 10 installation media

Select [Download tool now]

Select [Run]

Select [Accept]

Select [Create installation media(USB flash drive,DVD,or ISO file) for another PC] and click [Next]

Click [Next]

Select [USB flash drive] and click [Next]

Click [Next]

Wait for the process to finish, then select [Finish] to end the session

Please restart your computer to continue

Setup BIOS

When first starting the booting process, keep tapping [Delete] to enter BIOS Menu.

Go [Settings]> [Advanced]> [Integrated Peripherals], set [SATA mode] to [AHCI Mode].

Go [Settings]> [Advanced]> [Windows OS Configuration ], Change [Windows 10 WHQL support] to [UEFI], and click [F12] to save and exit.

Please restart your computer to continue

Perform Windows 10 installation process

When first starting the booting process, keep tapping [F11] on keyboard to enter boot device selection screen, select UEFI: USB Flash Drive, hit [Enter key] to continue

Warm reminder: The boot devices will be showing according to the disk you are using

Under the Windows installation environment, select [Next] to continue

Click [Install now]

If you have the product key, please input it here and go [Next] or select [I don’t have a product key] to continue.

Select the operating system you want to install and go [Next]

Check [I accept the license terms] and go [Next]

Select [Custom: Install Windows only (advanced)]

Note: All the data and files on the disk will be completely erased , we recommend you to back up your files before you continue

Select the disk partition where you want to install the system then click [Next]

After running the installation process, the computer will restart automatically and enter Windows Initial Setup Environment

Windows Initial Setup

Select your area and click [Yes] to continue

Select a keyboard layout and click [Yes] to continue

Add a second keyboard layout or go [Skip]

Connect to an available Ethernet or Wireless network or select [I don't have Internet]

Name your PC/ user name and click [next]

Set a password for your computer. If you don’t need a password, select [next] to skip

The following Settings can be enabled according to your personal needs

The following Settings can be enabled according to your personal needs

Wait until the configuration settings completed, you will enter the Windows desktop straightly, at this stage means the operating system has been installed successfully.